Standard drawings
STANDARD DRAWINGS - WATER
- WW-10-425 Typical Marker post Detail
- WW-10-501 Hydrant Installation
- W-351-C Excavation and pipe embedment details (under revision)
- W-353-C Concrete anchor (thrust) blocks
- W-354-C Sluice valve installation Revision 3 - issued 13/09/17
- W-363-C Sheet 1 of 3 - Service Connections Plan Non-pressure water service connections to new main and PE & Copper Court Bowl / Link Main arrangement - Issued 21/05/14
- W-363-C Sheet 2 of 3 - PE Court Bowl / Link Main arrangement, 100 to 63 PE connection details and washout detail - Issued 21/05/14
- W-363-C Sheet 3 of 3 - Non-pressure water service connections (PE & Copper to new main)- Issued 21/05/14
WSAA STANDARD DRAWINGS - WATER
- Standard Drawings Approved by Wannon for use in watermain construction works can be found in The Water Supply Code of Australia WSA 03-2002-2.3 Melbourne Retail Water Agencies Edition - Version 1 and are listed in the following document WSA 03 Standard Drawings
STANDARD DRAWINGS - SEWERAGE
- SEW-1304-V and SEW 1305-V - Manhole chases
- S-296-C - Sewer bedding and refill requirements (under revision) - Last updated on 19th september 2012
- S-297-C - Sewer branches (under revision)
- S-316-C - Sewer As Contructed drawing requirements
WSAA STANDARD DRAWINGS - SEWERAGE
- Standard Drawings Approved by Wannon for use in sewer construction works can be found in The Sewerage Code of Australia WSA 02-2002-2.3 Melbourne Retail Water Agencies Edition - Version 1 and are listed in the following document WSA 02 Standard Drawings
WATER AND SEWER DRAWING GENERAL NOTES
- The general notes for placement on design drawings are available as AutoCAD 2000 format DWG files.
- Water General Notes - Incorporates A-SPEC requirements. Last updated on 8th February 2018
- Sewer General Notes - Incorporates A-SPEC requirements. Last updated 8th February 2018
